Power, instant access, connectivity, & collaboration define modern multipurpose spaces.
From colleges to houses of worship to enterprises, organizations are putting one-trick ponies such as telepresence suites out to pasture as they look to get a bigger return on their AV investments. One reason is because a lot of expensive gear goes unused in single-purpose rooms, such as because employees are intimidated by complexity or because systems no longer fit the way they collaborate.
|A recent AV project installed by Sensory Technologies|
“Additionally, the room being booked for general meeting then prohibited another meeting which may have required the use of the videoconferencing system but it became unavailable.”
Multipurpose rooms help maximize ROI by spreading AV and IT technology around a facility to maximize usage. Here are few tips to consider when coming up with multipurpose-room strategy.
Bring Everyone to the Table Early On
During the design stage, get input from every type of employee to see how they’re collaborating—and how they want to but currently can’t. What types of devices do they prefer? Tablets feeding projectors? Interactive whiteboards? Videoconferencing? Are most meetings an executive holding forth, or is there a lot of back and forth?
“It’s important to consider the demographic of the people that will be using the space,” said Tim Troast, Middle Atlantic Products director of product development. “Power, connectivity and collaboration tools ideal for education settings will vary from those that would work well for corporate because of the users. Education applications focus more heavily on mobile devices, whereas commercial [applications focus] on laptop PCs.”
If you’ll be using outside parties such as architects and AV integrators, include all of them as early as possible to avoid expensive change orders later.
|FSR’s HuddleVU allows for multiple users to share and view laptops, tablets, and smart phone screens on one display.|
One common pitfall is putting meeting rooms on exterior walls to take in views. That design floods the room with light that often washes out displays and projectors, to the point that another $10,000 has to be found to pay for shades. Walls of windows also can produce temperature swings that force the HVAC system to run at a high rate, creating ambient noise that affects the mics’ ability to pick up speech.
“It’s common for AV to be brought in when drawing sets are about 80 percent,” Meglio said. “At that point, the general contractor has its pricing done. The key is to get in early and have these discussions.”
Furniture and Cables
Multipurpose rooms frequently have furniture and AV gear that can be moved around to support a variety of collaboration types, from lunch-and-learns to board meetings to all-hands sessions. So look for furniture that’s designed to provide flexibility, including for huddle rooms: small spaces designed for impromptu, Starbucks-style collaboration.
“We work closely with some of the key enterprise furniture manufacturers,” such as Steelcase,” said Randy Riebe, Polycom director of AV integrator business development. “They’re creating furniture specifically for these small meeting and huddle spaces.”
Although WiFi and other wireless technologies have cut a lot of cords, plenty remain, such as for power. Getting everyone’s input about how they want to connect to AV systems ensures that the finished rooms don’t wind up with cables that are unsightly and trip hazards.
“Don’t underestimate the value of cable management,” said Tim Troast, Middle Atlantic Products director of product development. “Plan for accommodations to make connections convenient: table boxes add power and connectivity to the work surface for easy access, [and] cable retractors manage the cables and reduce the clutter.”
Cart It In?
Some multipurpose rooms have all of their AV gear permanently installed. Others have only basics such as a few mics or even just network connectivity in the right spots, with displays, cameras and everything else wheeled in as needed. Often the choice comes down to budgets and use cases.
|The E Ink Nameplate on the back of the TAIDEN New Generation Multimedia Terminals|
At North Hennepin Community College, for example, “they prewire the room with all of the cabling necessary to get back to the headend,” said Sheeley, a member of the college’s board. “They’ll move the cart with cameras from room to room.”
Vendor portfolios reflect that preference.
“Our new FlexView Display Cart was designed with rugged casters that enable seamless maneuverability, even when wheeling over door thresholds,” said Middle Atlantic’s Troast. “It’s a videoconferencing and collaboration solution that can mount displays up to 90 inches and can be relocated and powered up with a few plugs.”
Could You Repeat That?
Microphones are key for effective collaboration in larger rooms, as well as smaller ones with remote participants. The better everyone can hear, the longer it takes for conferencing fatigue to set it.
But when it comes to the type of mic, there’s no consensus.
“Avoid ceiling mics,” said Jonathan McGarry, Revolabs field sales engineer for the Eastern U.S. region. “They’re very tempting because they’re up and out of the way, and users don’t have to manage them. But these rooms are large, so they typically have a much more aggressive HVAC system, which can create a lot of ambient noise.”
But others say that new audio technologies, such as beamforming, enable today’s ceiling mics to overcome limitations of just a generation ago.
“Polycom and ClearOne, with their DSPs, make very high quality mics,” said IVCi’s Meglio. “Today’s there’s no hesitation for me to put in ceiling mics. Five, six years ago, you would have to fight me as a client to get me to do that for you.”
Another type of noise is interference from other wireless mics, whether they’re in adjacent rooms—such as when a multipurpose room is divisible via moveable walls—or from tenants in a multi-company building. One solution is to use a product, such as Revolabs’ Executive Elite, with has a built-in scanner that sniffs the airwaves to see what else is using that block of spectrum.
|Ideal for multi-use spaces, the AMX Enzo offers users the unique ability to access documents and presentation content in mere seconds rather than having to go through the obstacle course of powering up a PC, logging in, accessing the network, etc. And when your meeting is over, with Enzo, there’s no logging out, no system updating to wait on. All files are instantly purged, so there’s no chance of them being left on the machine or accessible to someone else.|
“You can go into the management interface to scan and pull a report to give you an idea about what the environment looks like,” said Tim Root, Revolabs CTO.
Distributed antennas, such as those in Executive Elite, also minimize interference—and thus maximize the number of available channels—by keeping signals where they need to be.
“You can dial down the transmission distance,” McGarry said. “You don’t have to go through walls.
Another option is to use infrared mics, such as Media Vision’s TAIDEN HCS-5300 series. “That product makes up that one-third of our revenue in multipurpose spaces,” said Patrick Herlihy, Media Vision director of sales for North America.
Regardless of the type of technology they use, wireless mics are worth considering because that’s one fewer set of wires to be a trip hazard or eyesore when a room is reconfigured. Years down the road, they also provide flexibility for accommodating meeting styles that weren’t envision when the space was designed.
“Multidivisible and reconfigurable rooms are ideal for wireless mics,” Root said. “It’s a big percentage of our business, those rooms.”
Multipurpose rooms often are more challenging from a design standpoint simply because they have to accommodate so many work styles and devices—including ones that haven’t been envisioned yet. But that doesn’t mean big tradeoffs are necessary.
“Sometimes there may be a tendency to say, ‘It’s a multipurpose room, which means all uses are going to be somewhat compromised, so I’m not going to work as hard at getting it right,’” said Justin O’Connor, Biamp Systems audio product manager.
“I’ve spoken to designers who get excited about a multipurpose room because they see it as a challenge: ‘How can I make it perfect for every situation and anticipate what that organization will need in 18 months?’ A multipurpose room is where you can really practice your art.”
Tim Kridel is a regular contributor to AV Technology magazine.