搜索
Industrial News
How fog can affect the led display outdoor advertising panel Published:2018-09-04
We often see the gray sky in the morning, but it is actually a kind of thing called smog. It is estimated that many people still don't know what smog is. Its main constituents are formed by the mixture of sulphur dioxide, nitrogen oxides and respirable particulate matter. The first two are gaseous pollutants. They combine with fog to make the sky change instantly. Gray. In fact, fog is a natural phenomenon that is non-toxic and harmless, and the formation of plutonium is mainly the result of the interaction of a large number of particles suspended in the air and meteorological conditions. Smog often comes along, smog appears at the same time, and conditions such as water vapor, static wind, inversion temperature, and condensation of tuberculosis are indispensable.
 
The toxins in the smog not only seriously endanger people's health, but also have a great impact on the operation of outdoor LED displays. In fact, we can distinguish the smog into fog and sputum, because the main harm of the two on the led display is different:
First, the harm of fog to outdoor LED display: fog is formed by the condensation of water vapor in the air. That is to say, the humidity in the air is relatively large, which will cause the LED display to be wet. Excessive humidity causes the PCB board, power supply, power line and other components of the LED display to be easily oxidized and corroded, or even short-circuited, resulting in malfunction.
Second, the hazards of outdoor LED display: fog is a collection of dust, various tiny particles, etc. suspended in the air, in which dust particles suspended in the air are the core material of cockroaches. If it is affected by cockroaches for a long time, all kinds of fine dust in the air will enter the equipment through the vent hole. For the fan and other equipment, it will accelerate wear and even damage, and the dust will fall on the surface of the LED display internal control device, which not only reduces the The heat dissipation and insulation performance of the display will also accelerate the aging of the LED display and affect the normal service life.
So, how can the LED display wall be able to withstand the test in the smog for a long time, which requires users and engineers to pay more attention to the purchase and maintenance:
1. First of all, in the procurement process, the user must see whether the led display screen meets the dustproof level required by the environment. In terms of dust prevention, the international standard is IP0X-IP6X, which is a design level to prevent foreign matter intrusion. If installed in the northern part with more dust and haze, its front and back protection levels must reach IP65. That is to say, it is necessary to adopt a completely dustproof structure, that is, it is sealed in a state of water spray.
2, must pay attention to whether the LED display PCB board has been anti-corrosion treatment, such as surface coating three anti-paint; etc.; whether the power supply and power cord are selected for high-quality accessories; and view the most easily corroded screen welding, whether I have done anti-rust treatment.
3, in the daily maintenance process, must regularly remove dust, to avoid wet weather, dust absorption of air in the air caused by short circuit, resulting in mildew of PCB boards and electronic components.